G925AUCU3BOJ9 Firmware

Step 1: Extract the downloaded firmware zip using any extracting tool
Step 2: Get Odin3 v3.11.1.exe
Step 3: Power off the Galaxy S7 Edge
Step 4: Enter into Download Mode by pressing and holding Home, Power and Volume Down buttons together
Step 5: Launch Odin as Administrator on the computer. Click on the Odin tool then right-click and select Run as Administrator from the drop down menu
Step 6: Connect the S4 to the PC using USB cable while it is in Download mode. Wait for some time until Odin detects the device. When the phone is connected successfully, the ID: COM box in Odin will turn light blue with the COM port number. This step might take some time
Step 7: In Odin select the files in the following order
Tap on the BL button and select BL_G925AUCU3BOJ9_CL5927475_QB8398928_REV02_user_lo w_ship.tar.md5
Tap on AP button and select AP_G925AUCU3BOJ9_CL5927475_QB8398928_REV02_user_lo w_ship.tar.md5
Tap on CP button and select CP_G925AUCU3BOJ9_CL5927475_QB8398928_REV02_user_lo w_ship.tar.md5
Tap on CSC button and select CSC_ATT_G925AATT3BOJ9_CL5927475_QB8398928_REV02_us er_low_ship.tar.md5
Step 8: Enable Auto Reboot and F.Reset Time checkboxes in Odin. Ensure Re-Partition checkbox is not checked
Step 9: Click the Start button in Odin
Step 10: The installation should start now. It would take about five minutes to complete the installation. Once the process is completed, the phone will restart automatically. When you see the home screen on the phone, disconnect the phone from the computer

AP_G925AUCU3BOJ9_CL5927475_QB8398928_REV02_user_lo w_ship.tar.md5

BL_G925AUCU3BOJ9_CL5927475_QB8398928_REV02_user_lo w_ship.tar.md5

CSC_ATT_G925AATT3BOJ9_CL5927475_QB8398928_REV02_us er_low_ship.tar.md5

AP_G925AUCU3BOJ9_CL5927475_QB8398928_REV02_user_lo w_ship.tar.md5 Uploading...

from xda-developers http://ift.tt/24CV5X3
via IFTTT